نتایج جستجو برای: Heat treatment temperature

تعداد نتایج: 1958491  

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه تربیت مدرس - دانشکده منابع طبیعی 1391

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه صنعتی اصفهان 1389

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

Journal: :نشریه دانشکده فنی 0
اکبر اسحاقی دانشگاه تهران جعفر راثی زاده غنی دانشگاه تهران h. ghasemi دانشگاه تهران رضا تقی آبادی دانشگاه تهران

the effect of t6 heat treatment on the microstructure and wear behavior of al-332 piston alloy containing 1.2wt% iron was investigated. the results showed that the t6 heat treatment changed the morphology of acicular eutectic si particles to a more spherical form. the heat treatment also reduced the average length and blunted the needle-like ?- phase intermetallics through dissolution and fragm...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه تبریز 0

a semi-empirical mathematical model for predicting physical part of ignition delay period in the combustion of direct - injection diesel engines with swirl is developed . this model based on a single droplet evaporation model . the governing equations , namely , equations of droplet motion , heat and mass transfer were solved simultaneously using a rung-kutta step by step unmerical method . the...

Akbar Eshaghi Hamid Reza Ghasemi Jafar Raiszadeh Reza Taghiabadi

The effect of T6 heat treatment on the microstructure and wear behavior of Al-332 piston alloy containing 1.2wt% iron was investigated. The results showed that the T6 heat treatment changed the morphology of acicular eutectic Si particles to a more spherical form. The heat treatment also reduced the average length and blunted the needle-like ?- phase intermetallics through dissolution and fragm...

In the current study, the sources of variation in the mean hardness value of heat treated aluminum 2024 samples were identified by using metallurgical study and design of experiment methodology (full factorial method). Hardness measurements and microstructural investigations of the samples were carried out using Brinell hardness test and optical microscopy, respectively. The effects of several ...

Journal: :international journal of iron & steel society of iran 2013
s. shahabi a. shafyei m. a. golozar

a series of tialon coatings were synthesized in a gaseous mixture of argon, nitrogen and oxygen by cathodic arc evaporation method using a ti–al mosaic target. oxidation of coatings was carried out by heating the coated samples at the temperatures of 500, 600, 700, and 800°c for 1 h in air atmosphere. it was found that heat treatment changed the microstructure and composition of the coating. th...

Journal: :iranian journal of pharmaceutical sciences 0
hossein najafi department of materials science and engineering , sharif university of technology, tehran, iran, ziarat ali nemati department of materials science and engineering , sharif university of technology, tehran, iran, zahra sadeghianb oil research center, tehran, iran nafiseh sohrabi department of materials science and engineering , sharif university of technology, tehran, iran

this article describes the preparation and analysis of nano hydroxyapatite (ha) films on stainless steel 316l through sol-gel technique. the process started with preparation of a nitrate and phosphate sol. after aging the sol for 24 h at room temperature a ss316 substrate was dip-coated and heat-treated at 350 to 450 °c for different times in air. the coating phase and structure on substrate we...

Journal: :medical journal of islamic republic of iran 0
abdol khalegh deizaji from the institute of biophysics and biochemistry, university of tehran bahram gollaei the national research center for genetic engineering and biotechnology, tehran, islamic republic of iran

treatment of human promonocytic leukemic cell line u937 with mild hyperthermia in the temperature range of 40-43°c resulted in differentiation of these cells into monocyte/macrophage-like cells in a heat dose and time dependent manner. this process was accompanied by marked morphological, functional and proliferational changes. u937 cells which normally grow in supension in the logarithmic phas...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه شیراز - دانشکده علوم 1390

any change in the refractive index of a laser active medium can lead to serious degradation of beam quality, laser beam modes, laser performance and variation in the intensity distribution. alteration in the refractive index of laser active medium is especially notable in high power lasers. it is clear that in the laser beam production, the pumping agent induces a great amount of heat which...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید